How to apply Bopp Package Tape correctly for optimal performance?

Here are some guidelines for applying Bopp Package Tape correctly for optimal performance:
Prepare the surface: Make sure the surface where you will apply the tape is clean, dry, and free of dust, grease, or other contaminants. If necessary, clean the surface with a suitable solvent and let it dry completely before applying the tape.
Choose the right tape: Choose the appropriate type of Bopp Package Tape for your application based on factors such as the weight of the package, the type of material, and the environmental conditions it will be exposed to.
Cut the tape to the right length: Cut the tape to the appropriate length, leaving a little extra at the ends for easy handling.
Apply the tape: Hold the tape firmly against the surface and apply it smoothly, avoiding wrinkles or air bubbles. Use a dispenser or a tape gun to help you apply the tape evenly and quickly.
Seal the tape: After applying the tape, press it firmly with your fingers or a roller to ensure a good bond between the tape and the surface. Pay special attention to the edges and corners, as they are the most vulnerable areas for tape failure.
Store the package properly: Once you have sealed the package with Bopp Package Tape, make sure to store it properly to avoid damage or degradation. Follow the manufacturer's recommendations for storage conditions and handling.
jinke-adhesive.com